Often the Simplicity Of Keku Divider Panel Fixings

Have you ever gone straight into a modern office block or a shop and wondered exactly how the wall panels seem to do not have anything keeping them on to the wall? Usually there are no connectors or perhaps screws visible that are keeping them with regard to the wall. So how is this effect achieved?

A number of years ago achieving this outcome would have been unthinkable and you will have discovered some form of apparent fixing at the top and bottom of the wall coverings holding them on to the wall behind, but this did look unsightly unless the screws heads happened to be filled over.

However in filling them in you had 2 problems, firstly looking for a colour match with all the filler was very hard. Second in case you filled them in then it made the sections very tough to remove in a hurry, which may be an issue in case you needed to get to any electrical equipment or perhaps water pipes sat behind them in a hurry.


One German company recognised the need to end up with a wall panel fixing method that helped panels being securely fixed to a wall without any noticeable fixings demonstrating, but also made it possible for them being introduced fast in the event on the need to have to sign up for a panel off. This has proved to be an idea that outlet fitters love using as it is giving such a clean look.

The Keku wall panel process works out very simply by obtaining lightweight aluminium “I” cross section beams which are like tiny RSJ beams in condition. These come pre drilled with cracks and are screwed to the true wall.

A load bearing frame component will be connected to the beam and the relevant panel component connected to the panel, this then means the control panel can then be slid into place with the panel component clipping in to site with the frame component. This forms a relationship, which in effect locks the control panel on the wall structure, but by simply sliding the panel upwards the parts come apart releasing the control panel.

The simple fact that the beams come pre drilled for ease of assembly also means that the frame pieces can be attached to the beams at a range of heights. This in turn allows a great deal of independence when hanging the wall coverings.

The end result is wall panel fixings that can be fixed firmly, but invisibly available but allow for a really high dimensional reliability, with spaces that’re accurate, but can be diverse in breadth.
Bathroom Wall Panels

Leave a comment

Your email address will not be published. Required fields are marked *